Race-1 2021/2022 Labor Pricing


Race-1 Secondary Engine Seal Process. New engine directly from our inventory. Includes:

  • Installation of six triple-coded high security seals!
  • Public documentation of seals and engine!
  • Legal contract of sealing process!

$400 ($200 for contracted Series and Tracks)

Race-1 Secondary Engine Seal Process. Used engines. Includes:

  • Installation of six triple-coded high security seals;
  • Public documentation of seals and engine;
  • Legal contract of sealing process;
  • Complete tech procedure and DYNO evaluation (required); and
  • Additional requirements and conditions.

$750 ($650 for contracted Series and Tracks)

Sprint Pan Swap (Labor). Includes:

  • Installation of 604-style pan onto 602 Sprint; and
  • Installation of Sanction Seals!
  • (Does NOT include parts.)

$325

Cam Drill 602 or 604 Includes:

  • Installation of rear drive spud and seal plate on 602 or 604 Sprint engine; and
  • All parts and sanction seals!

$625

DirtCar Verification & Secondary Sealing Includes:

  • Camshaft verification;
  • GM seal verification;
  • New 602 Sportsman Modified only;
  • Installation of two DirtCar cable seals; and
  • Installation of one RYR identifying cable seal.

$350

602/604 Winterizing. Includes:

  • New handpicked valve springs!
  • New keepers (602 only)!
  • New Race-1 Ready-to-Run spark plugs!
  • Leak test cylinders!
  • Service valve springs!
  • Dyno evaluation!
  • Fog engine for storage!
  • Laboratory oil analysis!

602: $775

604: $950

602 Pro Series Race Prep. Includes:

  • Completion of 27-point Race-1 Check List
  • Installation of LEGAL handpicked valve springs
  • Check and adjust installed heights (if applicable)
  • Blueprint distributor (if applicable)
  • Engine lift plate
  • Aluminum exhaust covers
  • Water temperature and oil pressure fittings

$615

604 Pro Series Race Prep. Includes:

  • Completion of 35-point Race-1 Check List
  • Installation of LEGAL handpicked valve springs
  • Check and adjust installed heights
  • Engine lift plate
  • Aluminum exhaust covers
  • Water temperature and oil pressure fittings

$715

Dyno Break-In & Evaluation. Includes:

  • Joe Gibbs or Maxima Break-In Oil
  • Wix Oil Filters
  • Break In Fuel (up to 10 Gallons)
  • Break-In is typically 25 to 30 power pulls
  • Oil Analysis
  • Engine Analysis
    • Leaks
    • Horse power
    • Torque
    • Acceleration rate
    • Pressures
    • Temperatures

$675

602 Rebuild

  • This is for GM Bolted 602 engines only and includes brand new cylinder heads. Also, includes Dyno and Sanction Seals.
  • This package does NOT include block, crank, rods, pistons, rocker arms, camshaft, lifters, harmonic balancer, oil pump, oil pan or valve covers.

$4450
with pistons $5450

604 Rebuild

  • This is for GM Bolted 604 engines only and includes Dyno and Sanction Seals.
  • This does NOT include block, crank, rods, pistons, heads, exhaust valves, bee hive keepers or locators, rocker arms, camshaft, lifters, timing set, harmonic balancer, oil pump, oil pan or valve covers.

$5825
with pistons $6825


Chevrolet Performance CTC Engine Services

Race-1 specializes in the GM CTC engines and we offer a wide variety of services specific to the 602 & 604 crate engines. From pre-race prep, dyno break-in, test and tune, Race-1 will also outfit your engine with all the name brand, spec parts you need to complete your sealed crate engine.

Brands we promote and use: Chevrolet Performance, Stealth Racing Carburetor, Beyea Headers, Hendren Mufflers, MSD Ignition, KRC Power Steering, CV Products Fuel Pumps, R2C Air Filters, Bert Transmissions plus more..!

We have a full line of 602 & 604 track tested, patent pending “Crate Innovations” products. Race-1 is an authorized rebuilder for FASTRAK, NeSmith, RUSH and specific NASCAR tracks.

Shop our catalog

Sealed Crate Engine Rebuilding, Repairing, and Verifying

Race-1 is authorized for Crate USA, RUSH, DirtCar, FASTRAK, USMPA, Must See, Midvale Speedway, Tyler County Speedway, and numerous other venues.

Contact Brad Hibbard (330) 540-7223 or .


New Engine Pre-prep and Dyno Testing & Tuning

Race-1 specializes in GM 602 & 604 sealed crate engines. With our on site assembly shop and dyno facility we offer complete race pre-prep for your new GM crate engine and also engine break-in and tuning. Race-1 will also outfit your engine with all the name brand, spec parts you need to complete your sealed crate engine.

Contact Brad Hibbard (330) 540-7223 or .


Shop Securely:

  • Visa
  • Mastercard
  • Discover
  • PayPal
e-Check
WSM SSL Comodo Secure Site

Race-1

//Scalable Solution for custom Out of stock script $( document ).ajaxStop(function() { });